Call us: 210-6775555 / 210-6711155 Email: This email address is being protected from spambots. You need JavaScript enabled to view it.


Aluminium rails BraunAbility

Rating: Not Rated Yet
Manufacturer:BraunAbility
Product Code:

Description

These aluminium profiles are used to give vehicles flexibility in flooring layout. Each rail has a track where seats and various tie-downs can be securely fitted in the vehicle. In other words, it's possible to move, add or remove equipment as needed. As an alternative to rails, we also have our full aluminium flooring solutions Innotrax and SpaceFloor.

Low profile rail
Easy installation that can be recessed into the vehicle floor for a neat finish, with a height above the finishing floor of only 4 mm. Low profile rail requires M8 fasteners, fixed into countersunk holes at 101.6 mm intervals for a flush head finish.

The low profile rail is available in different lengths up to 6m and can be cut to length under special order.

Our rails can be machined, drilled, undrilled and unmachined as per converters requirements.

Low profile aluminium rails with different machining

Low profile rail with measurements

Model Width Height Weight Length
Machined & drilled
LPRD36 46 mm 15.5 mm 0.933 kg/m 368 cm
LPRD45 46 mm 15.5 mm 0.933 kg/m 450 cm
LPRD50 46 mm 15.5 mm 0.933 kg/m 500 cm
Machined & undrilled
LPRF36 46 mm 15.5 mm 0.933 kg/m 368 cm
LPRF45 46 mm 15.5 mm 0.933 kg/m 450 cm
LPRF50 46 mm 15.5 mm 0.933 kg/m 500 cm
Unmachined & drilled
LPRB36 46 mm 15.5 mm 0.933 kg/m 368 cm
LPRB45 46 mm 15.5 mm 0.933 kg/m 450 cm
LPRB50 46 mm 15.5 mm 0.933 kg/m 500 cm
Unmachined & undrilled
LPRA36 46 mm 15.5 mm 0.933 kg/m 368 cm
LPRA45 46 mm 15.5 mm 0.933 kg/m 450 cm
LPRA50 46 mm 15.5 mm 0.933 kg/m 500 cm

 

Surface rail
Designed for vehicles where flush-fitted rails are not possible, Surface rail is quick and easy to install into most vehicle floors, with a finished height of only 14 mm above the floor. Surface rail is a popular solution for 3rd point passenger restraint fitment (cant rail) and as a wall storage rail for unused equipment

Surface rail requires M8 fasteners, fixed into countersunk holes at 101.6mm intervals for a flush head finish. A 3.66m length of surface rail requires 37 fasteners. 

The surface rail is available in different lengths up to 6m and can be cut to length under special order.

Our rails can be machined, drilled, undrilled and unmachined as per converters requirements.

Surface aluminium rails with different machining

Surface rail with measurements

Model Width Height Weight Length
Machined & drilled
SRD36 42 mm 13.5 mm 0.8 kg/m 368 cm
SRD45 42 mm 13.5 mm 0.8 kg/m 450 cm
SRD50 42 mm 13.5 mm 0.8 kg/m 500 cm
Machined & undrilled
SRF36 42 mm 13.5 mm 0.8 kg/m 368 cm
SRF45 42 mm 13.5 mm 0.8 kg/m 450 cm
SRF50 42 mm 13.5 mm 0.8 kg/m 500 cm
Unmachined & drilled
SRB36 42 mm 13.5 mm 0.8 kg/m 368 cm
SRB45 42 mm 13.5 mm 0.8 kg/m 450 cm
SRB50 42 mm 13.5 mm 0.8 kg/m 500 cm
Unmachined & undrilled
SRA36 42 mm 13.5 mm 0.8 kg/m 368 cm
SRA45 42 mm 13.5 mm 0.8 kg/m 450 cm
SRA50 42 mm 13.5 mm 0.8 kg/m 500 cm

 

Heavy duty rail
Heavy duty rail is specially designed to increase the structural integrity of the vehicle floor strength, it is the ideal choice for coach-built conversions. The heavy duty rail is designed to be used with M8 steel bolt and is available in four different lengths. 

Heavy Duty Rail offers greater flexibility with fewer fixing points. Fixings can be positioned at up to 600mm intervals to match vehicle frame chassis and reduce installation cost

To further improve the versatility of the floor configuration, low profile rail can be fitted into heavy duty rail’s side channels.

A heavy duty rails plank

Short heavy duty rail combined with wood flooring

Model Width Height Weight Length
Machined & undrilled
HDRF39 124 mm 38 mm 2.95 kg/m 390 cm
HDRF47 124 mm 38 mm 2.95 kg/m 470 cm
HDRF48 124 mm 38 mm 2.95 kg/m 480 cm
HDRF50 124 mm 38 mm 2.95 kg/m 500 cm

 

Kit 1 comprises:

  • 2 pieces of either drilled Low Profile Rail or drilled Surface Rail (1.84m each)
  • 38 M8 fastener sets which include steel screws, nyloc nuts and steel washers
  • 18 M8 underfloor spreader plates to ensure high level of safety
  • 4 metal end caps for a flush finish to the mounted floor

Kit 2 comprises:

  • 4 Standard Lockables to help you locate your seat in a safe position.
  • 2 pieces of either drilled Low Profile Rail or drilled Surface Rail (1.84m each)
  • 38 M8 fastener sets which include steel screws, nyloc nuts and steel washers
  • 18 M8 underfloor spreader plates to ensure high level of safety
  • 4 metal end caps for a flush finish to the mounted floor

accessories_rails.png

accesories_rails_2.png

Reviews

Last Reviews

    There are yet no reviews for this product.
Please write your (short) review....(min. 50, max. 2000 characters)
First: Rate the product. Please select a rating between 0 (poorest) and 5 stars (best). Rating:
Characters written:
Back to: Δάπεδα και Καθίσματα

Product Categories

Products Filter

Wishlists

You have no product to wishlist.

Compare Products

You have no product to compare.